Galaxy Note 2 Updated to N7100XXUEML2 Android 4.3 Stock Firmware

Galaxy Note 2 Updated to N7100XXUEML2 Android 4.3 Stock Firmware

Step-1: Download N7100XXUEML2 Android 4.3 Jelly Bean for Galaxy Note 2 to computer. Extract the firmware zip using winrar/7zip/winzip or any other extracting tool to get a .tar.md5 file with some other files
Step-2:  Download Odin3 v3.07 and extract it to get Odin v3.07.exe
Step-3: Power off the Galaxy Note 2. Boot it into Download Mode by pressing and holding Volume Down, Home and Power buttons together until you see the Samsung logo or the red and the red/yellow appears on the phone's screen
Step-4: Run Odin3 v3.07.exe as Administrator
Step-5: Connect the phone to computer using USB cable while it is in Download Mode. The successful connection will be indicated by an Added message in Odin. Also one of the ID: COM box will turn blue with the COM port number
Note: If the Added message does not appear, try another USB port located at the back side of the computer. If Odin still fails to recognise the phone then reinstall USB driver.
Step-6: In Odin select the files extracted from N7100XXUEML2 zip
a) Click the PDA button and select the file with .tar.md5 extension
b) Click the Phone button and select file with MODEM in its name
c) Click the CSC button and select file with CSC in its name
d) Click the PIT button and select .pit file
Note: Ignore the last three steps if such files are not found.
Step-7: Enable Auto Reboot and F.Reset Time checkboxes in Odin. But ensure Re-Partition option is unchecked, select it only when .pit file is used
Step-8: Click the Start button in Odin. The installation process should begin now and take a few minutes to complete
មានចម្ងាល់ ឬបញ្ហាអាចទំនាកទំនងបាន៖ 088​4455848
ទទួលខុសត្រូវខ្លួនឯងចំពោះការដំឡើង!!!! សំណាងល្អ